LJIEE TAKER F722 BT 8Bit 60A STACK

# Features: Uses STM32F722 chip, ICM42688-P gyroscope, 512M black box, Bluetooth tuning, Type-C port, integrated LC filter and barometer, dual BEC (9V@2.5A + 5V@3A), compatible with TAKER H60_BLS 60A 4IN1 ESC and DJI Air Unit, easy installation with shock mounts.

# Specs: GEP-F722-BT-HD V3 FC (36.9×36.9mm, 8.2g, 3-6S input, 5 UARTs) and TAKER H60_BLS ESC (60A continuous/65A burst, 42×45.7mm, 14.9g).

# Included: FC, ESC, capacitor, cables (O3 3-in-1, adapter, etc.), screws, nuts, silicone pads.

Features

Uses mainstream STM32F722 chip
Equipped with the latest ICM42688-P gyroscope
512M black box storage
Supports Bluetooth parameter tuning
Integrated LC filter
Upgraded Type-C USB interface
Compatible with TAKER H60_BLS 60A 4IN1 ESC for silky-smooth flight
Directly plugs into the DJI Air Unit
Simple and effective installation with shock-absorbing mounts (ensures stable gyroscope performance)
Integrated barometer
9V@2.5A + 5V@3A dual independent BEC

Specifications

GEP-F722-BT-HD V3 Flight Controller

Parameter	Details
MCU	STM32F722
IMU	ICM42688-P (SPI)
Air Unit Connection	Directly plugs into the DJI Air Unit
Black Box	512M onboard
Bluetooth	Supported
Barometer	Supported
USB Interface	Type-C
OSD	BetaFlight OSD with AT7456E chip
BEC	5V@3A, 9V@2.5A dual BEC
Firmware Target	GEPRCF722_BT_HD_V3
Size	36.9×36.9mm; Hole pattern: 30.5×30.5mm; φ4mm hole → φ3mm with silicone shock-absorbing ring
Input Voltage	3-6S LiPo
UART	5 groups (UART4 fixed for Bluetooth)
Power Filter	Integrated LC filter
Weight	8.2g

TAKER H60_BLS 60A 4IN1 ESC

Parameter	Details
Input Voltage	3-6S LiPo
Ammeter	Supported
Continuous Current	60A
Burst Current	65A (for 5 seconds)
Supported Protocols	Dshot 150/300/600
Size	42×45.7mm; Hole pattern: 30.5×30.5mm; φ4mm hole → φ3mm with silicone shock-absorbing ring
Weight	14.9g
Target	B_X_30