LJIEE TAKER F405 BLS 65A V2 STACK

# Features: Uses STM32F405 chip and 42688-P gyroscope, 16M black box, integrated LC filter, Type-C port, direct DJI Air Unit connection. Paired with TAKER H65_8S_BLS 65A ESC for smooth flight, with dual BECs (12V@2.5A + 5V@3A) and stable gyro performance via shock absorbers.

# Specs: LJIEE F405-HD V3 FC (37.15×37.15mm, 7.3g, 3-6S input, 6 UARTs); TAKER H65_8S ESC (65A continuous/70A burst, 42×45.7mm, 14.9g, 3-8S).

# Included: FC, ESC, capacitor, cables (DJI adapter, etc.), XT60 cable, screws, nuts, silicone grommets.

Features

Uses mainstream STM32F405 chip
Equipped with the latest 42688-P gyroscope
16M black box storage
Integrated LC filter
Upgraded Type-C USB interface
Directly plugs into the DJI Air Unit
Paired with TAKER H65_8S_BLS 65A 4IN1 ESC for a silky-smooth flying feel
Simple and reasonable installation; shock absorbers ensure stable gyroscope performance
12V@2.5A + 5V@3A dual independent BEC

Specifications

GEP-F405-HD V3 Flight Controller

Parameter	Details
MCU	STM32F405
IMU	ICM42688-P (SPI)
Air Unit Connection	Direct plugging into DJI Air Unit
Black Box	16M onboard
Barometer	Supported
Motor Outputs	M1-M6
USB Interface	Type-C
OSD	BetaFlight OSD w/ AT7456E chip
BEC	5V@3A, 12V@2.5A dual BEC
Firmware Target	LJIEE 405
Size	37.15×37.15mm
Mounting	30.5×30.5mm; φ4mm hole → φ3mm with silicone shock-absorbing circle
Input Voltage	3-6S LiPo
UART	6 UARTs
Power Filter	Integrated LC filter
Weight	7.3g

TAKER H65_8S_BLS 65A 4IN1 ESC

Parameter	Details
Input Voltage	3-8S Lipo
Ammeter	Supported
Continuous Current	65A
Burst Current	70A (5 seconds)
Supported Protocols	Dshot 150/300/600
Size	42×45.7mm; Hole pattern: 30.5×30.5mm; φ4mm hole → φ3mm with silicone shock-absorbing ring
Weight	14.9g
Target	B_X_30