LJIEE TAKER F722 BLS 65A V2 STACK
LJIEE TAKER F722 BLS 65A V2 STACK
LJIEE TAKER F722 BLS 65A V2 STACK
LJIEE TAKER F722 BLS 65A V2 STACK
LJIEE TAKER F722 BLS 65A V2 STACK
LJIEE TAKER F722 BLS 65A V2 STACK
LJIEE TAKER F722 BLS 65A V2 STACK
  1. LJIEE TAKER F722 BLS 65A V2 STACK
  2. LJIEE TAKER F722 BLS 65A V2 STACK
  3. LJIEE TAKER F722 BLS 65A V2 STACK
  4. LJIEE TAKER F722 BLS 65A V2 STACK
  5. LJIEE TAKER F722 BLS 65A V2 STACK
  6. LJIEE TAKER F722 BLS 65A V2 STACK
  7. LJIEE TAKER F722 BLS 65A V2 STACK

LJIEE TAKER F722 BLS 65A V2 STACK

# Features: Uses STM32F722 chip and 42688-P gyroscope, 16M black box, integrated LC filter, Type-C port, direct DJI Air Unit connection, paired with TAKER H65_8S_BLS 65A ESC for smooth flight. Includes dual BECs (9V@2.5A + 5V@3A) and stable gyro performance via shock absorbers.
# Specs: LJIEE F722-HD v2 FC (36.85×36.85mm, 8.1g, 3-6S input); TAKER H65_8S ESC (65A continuous/70A burst, 42×45.7mm, 14.9g, 3-8S).
# Included: FC, ESC, capacitor, cables (DJI adapter, etc.), XT60 cable, screws, nuts, silicone pads.
Categories: , , Tags: , Brand:
Inquire Now

    Features

    • Uses the mainstream STM32F722 chip
    • Equipped with the latest 42688-P gyroscope
    • 16M onboard black box storage
    • Integrated LC filter
    • Upgraded Type-C USB interface
    • Directly plugs into the DJI Air Unit
    • Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC for a smooth flying experience
    • Simple and efficient installation with shock absorbers (ensures stable gyroscope performance)
    • Dual independent BECs: 9V@2.5A and 5V@3A

    Specifications

    GEP-F722-HD v2 Flight Controller

    Parameter Details
    MCU STM32F722
    IMU ICM42688-P (SPI)
    Air Unit Connection Direct plug-in to DJI Air Unit
    Black Box 16M onboard
    USB Interface Type-C
    Barometer Supported
    OSD BetaFlight OSD w/ AT7456E chip
    BEC 5V@3A, 9V@2.5A dual BEC
    Firmware Target LJIEE F722
    Dimension 36.85×36.85mm; Mounting hole size: 30.5×30.5mm; φ4mm hole → φ3mm with silicone shock-absorbing circle
    Input Voltage 3-6S LiPo
    UART 5
    Power Filter Integrated LC filter
    Weight 8.1g

    TAKER H65_8S_BLS 65A 4IN1 ESC

    Parameter Details
    Input Voltage 3-8S Lipo
    Ammeter Supported
    Continuous Current 65A
    Burst Current 70A (5 seconds)
    Supported Protocol Dshot 150/300/600
    Dimension 42×45.7mm; Mounting hole size: 30.5×30.5mm; φ4mm hole → φ3mm with silicone shock-absorbing ring
    Weight 14.9g
    Firmware Target B_X_30

    Includes

    • 1 x FC board
    • 1 x ESC board
    • 1 x Capacitor
    • 1 x DJI Air Unit adapter cable
    • 1 x Flight controller adapter cable
    • 1 x XT60 power cable
    • 4 x M3×30 screws
    • 4 x M3×25 screws
    • 8 x Nylon nuts
    • 8 x Silicone anti-shake pads
    • 2 x SH1.0 4pin silicone cables
    • 1 x Camera connection cable

    Reviews

    There are no reviews yet.

    Be the first to review “LJIEE TAKER F722 BLS 65A V2 STACK”

    Your email address will not be published. Required fields are marked *

    Related products